Kbc-networks H.264 Encoder Manual de usuario descargar pdf (Pagina 22)

Encoder User Manual

Manual-H264_ENC-Rev1207A

www.kbcnetworks.com

3.3.5 Network: Type of Service (ToS)

Streaming data with a higher ToS tag will be prioritized in the data transmission

when ToS is enabled.

Note: Click on “Apply” in this section of the web browser GUI to apply changes to

the ToS.

3.3.6 Network: UPnP

If connecting the encoder to a DHCP router, the unit can be found via UPnP when the

encoder and your computer are both set to DHCP. This section is used to identify the

device from your network devices list. Use the “Friendly Name” section to name the

device so that it will appear as you have identified it when locating via UPnP.

Note: Click on “Apply” in this section of the web browser GUI to apply changes to

the UPnP Setting.

Item

Configuration Detail

1 Click “Enable” from the pull down menu

2 Click the pull down menu to choose the service type

2a “Minimize-Delay”

2b “Maximize-throughput”

2c “Maximize-Reliability”

2d “Normal-Service” (shown in the example above)

a ~ d

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 48 49

Sin comentarios

Kbc-networks H.264 Encoder Manual de usuario Pagina 22